An upgraded flagship drone platform, the Matrice 350 RTK sets a new benchmark for the industry. This next-generation drone platform features an all-new video transmission system and control experience, a more efficient battery system, and more comprehensive safety features, as well as robust payload and expansion capabilities. It is fully powered to inject innovative strength into any aerial operation.
Flies 55 minutes and stretches 20 km with O3 Enterprise transmission—covers more, faster.
Hauls up to 2.7 kg across three gimbals—think Zenmuse H20N, L2, or custom gear.
IP55-rated, it laughs off dust, rain, and temps from -20°C to 50°C.
Six-way obstacle sensing, night-vision FPV, and RTK precision keep it steady and secure.
Built tough, the Matrice 350 RTK features powerful propulsion, enhanced protection rating, and excellent flight performance, allowing it to effortlessly tackle a wide variety of challenges.
Matrice 350 RTK adopts DJI O3 Enterprise Transmission, which supports triple-channel 1080p HD live feeds, [5] and a max transmission distance of 20 km. [6] Both the aircraft and the remote controller have a four-antenna transceiver system, which can intelligently select the two optimal antennas to transmit signals, while the four antennas receive signals simultaneously. In this way, anti-interference capabilities are significantly improved, and transmission stability is optimized.
The O3 video transmission signal can also work in tandem with 4G networks.* In cases where the O3 video transmission signal is interfered with, the Matrice 350 RTK can still maintain stable video transmission via 4G network, effortlessly handling signal obstructions in complex urban structures and environments.
* To use 4G Enhanced Transmission, the aircraft must be equipped with the Matrice 350 RTK 4G Dongle Kit (sold separately), and the remote controller must be equipped with the DJI Cellular Dongle (sold separately) or connected to the internet via Wi-Fi. This service is not available in some countries and regions. Please consult your local dealer for details.
The M350 RTK is flying out the door—don’t get left behind! Click “Buy Now” or reach out to lock in your unit at our best price. Let’s get your missions off the ground—contact us today!
M350 RTK is IP55 rated.
The IP rating is not permanently effective and may decrease due to wear and tear. Do not fly in rain heavier than 100 mm/24 hr.
M350 RTK comes with the standard 2110s Propellers. You can also use the optional 2112 High-Altitude Low-Noise Propellers.
Yes, but only one type of propeller can be used simultaneously. Do not mix two types of propellers during use.
Yes. When replacing the propellers, please also replace the corresponding screws and attach a proper amount of threadlocker (threadlocker 243 is recommended) to the surface of the new screws.
To operate a drone fitted with a DJI 4G Dongle in the UK you must:
1. Apply for an Ofcom UAS (Unmanned Aircraft Systems) Licence.
2. Seek written permission for airborne use of mobile network user equipment and use a network SIM card specifically authorised for 4G UAS operations, if directed by the network.
Further details are referenced in Ofcom licensing guidance.
Depending on the weight of your drone, you may need to register as an operator and obtain an operator ID from the CAA. To apply for an operator ID, visit the CAA website: Registering a drone or model aircraft | UK Civil Aviation Authority.
For the Ofcom UAS Licence, visit the Ofcom website.
Ensure you meet all requirements and guidelines provided by these authorities.
No, a standard network SIM is not compliant with the legal requirements for operating the 4G Dongle in the UK. You must obtain a dedicated SIM authorised for UAS operations through your network provider.
With a 220V power supply, it takes approximately 60 minutes to fully charge two TB65 Intelligent Flight Batteries and approximately 30 minutes to charge them from 20% to 90%.
With a 110V power supply, it takes approximately 70 minutes to fully charge two TB65 Intelligent Flight Batteries and approximately 40 minutes to charge them from 20% to 90%.
Yes, but only two TB60 batteries can be used simultaneously. Do not mix TB60 and TB65 batteries during use.
During long-term storage, the battery will automatically discharge to approximately 50% to ensure storage safety and extend battery life. It is normal for the battery to feel slightly warm during this process.
Yes. The operating temperature of the TB65 Intelligent Flight Battery is -20° to 50° C (-4° to 122° F). When the battery is used in low-temperature environments, the battery life will be reduced. Please schedule the flight time properly. To ensure optimal performance, it is recommended to keep the battery temperature above 15° C (59° F) before flying.
For charging in environments of -20° to 5° C (-4° to 41° F), the battery will automatically heat up before starting the charging process. Once installed on the aircraft and powered on, the battery, if at a low temperature, will automatically heat up to maintain a temperature of approximately 16° to 20° C (60.8° to 68° F).
There are three ways to calculate the service life, including 12 months, 400 cycles, and 120 days of high-power storage. The final service life depends which comes first.
The energy of the TB65 Intelligent Flight Battery is 263 Wh, so it cannot be carried onto an airplane according to airline regulations.
The fans automatically turn on or off and adjust rotation speed according to the ambient temperature and battery temperature.
The BS65 Intelligent Battery Station can store eight TB65 Intelligent Flight Batteries and four WB37 Intelligent Batteries at the same time. It can charge two TB65 batteries and one WB37 battery simultaneously. Batteries with the highest battery level will be charged first, followed by others with lower levels.
The charger for the remote controller is integrated in the BS65 Intelligent Battery Station. You can charge the remote controller by connecting it to the battery station with the USB-C cable.
No.
Yes. Please update the firmware of DJI RC Plus to v01.02.04.40 or higher, select the corresponding drone model in DJI Pilot 2, and then complete the linking.
Zenmuse H30, Zenmuse H30T, Zenmuse L2, Zenmuse H20N, Zenmuse L1, Zenmuse P1, Zenmuse H20, Zenmuse H20T and third-party-certified payloads developed based on the DJI Payload SDK.
M350 RTK supports mounting up to three payloads simultaneously, with the single upward gimbal and dual downward gimbals used together.
M350 RTK supports mounting up to three payloads simultaneously, with the single upward gimbal and dual downward gimbals used together.
When M350 RTK is mounted with Zenmuse P1 or Zenmuse L1, the task folder stores photos/point clouds, GNSS observations, and image log files, which are used for PPK post-processing calculations.
Yes, there is no limit to the number of drones that can be used simultaneously.
You can update firmware in the following ways:
1. Connect the aircraft to a computer and use DJI Assistant 2 (Enterprise Series) to update the firmware of the aircraft, remote controller, and D-RTK 2 Mobile Station.
2. Use DJI Pilot 2 to update the firmware of the aircraft, remote controller, and Intelligent Battery Station.
3. Visit the official DJI website to download the offline firmware update package for the aircraft, Intelligent Battery Station, and remote controller. Then, insert an SD card storing the firmware package into the remote controller for offline update.
For details, please refer to the user manual.
E-Port is a new-generation expansion port of DJI Enterprise drones. E-Port has the same pin definition as the Onboard SDK port, but the USB link requires that the third-party payload be used as a secondary device (opposite to the Onboard SDK port). In terms of software, E-Port only supports Payload SDK V3 or later versions, and is not compatible with Onboard SDK. For technical support, please contact dev@dji.com.
M350 RTK supports Payload SDK, Mobile SDK, and Cloud API. For technical support, please contact dev@dji.com.
Third-party payloads developed based on the Skyport V2 or X-Port can be compatible with M350 RTK after updating the adapter and third-party firmware. For other questions, please contact the corresponding payload provider or DJI Support.
For details, please refer to the Accessory Compatibility List on the Downloads page.
M350 RTK has two versions, including a Chinese version and a general version. The former can be used in China only, and the latter can be used in non-China regions. Please consult your local after-sales center or dealer about product availability.
Scavenger Fire & Safety is a Gold Member of Fire Protection Association Australia (FPAA) and holds certifications in ISO 9001:2015 Quality Management System and ISO45001:2018 Safety Management System.
© 2025 All Rights Reserved.
